CATIA 技术交流论坛 › 首页 Home ›CATIA 课程学习› CATIA 基础课程 › 查看内容

Generative Shape Design - Detailed Steps

2021-9-10 20:42| 发布者: 无名| 查看: 867| 评论: 0

摘要: Table of ContentsWireframe Recapitulation Exercise 4Surface Recapitulation Exercise 8Operation Recapitulation Exercise 17Advanced Tasks Recapitulation Exercise 30B-Pillar 41Step 1: Publishing the Styl ...

Generative Shape Design

Detailed Steps

Table of Contents

Wireframe Recapitulation Exercise 4

Surface Recapitulation Exercise 8

Operation Recapitulation Exercise 17

Advanced Tasks Recapitulation Exercise 30

B-Pillar 41

Step 1: Publishing the Styling Inputs and Creating the Mating Part 41

Step 2: Creating the Outer Part 50

Step 3: Creating the Inner Part 60

Step 4: Creating the Reinforcement Part 71

Step 5: Replacing the Input Styling Data and Managing the Update Failures 79

Mobile Phone 84

Step 1: Creating the Wireframe Geometry 84

Step 2: Creating the Surfaces 89

Step 3: Performing operations 97

Step 4: Analyzing and Modifying 104

Step 5: Completing the part in Part Design 111

Knob 115

Step 1: Creating the Wireframe Geometry 115

Step 2: Creating the Basic Surfaces 119

Step 3: Performing Operations the Basic Surfaces 121

Step 4: Analyzing and Modifying the draft angle 128

Step 5: Offsetting a solid 130

Bottle Exercise 134

Step 1: Bottle Bottom Creation 134

Step 2: Bottle Body Creation 159

Step 3: Bottleneck 180

Step 4: Assemble the three bodies 207

Step 5: Create the Bottleneck Screw 224

Space Mouse Base 237

Step 1: Create the Filleted pad. 237

Step 2: Create the surfacic elements. 244

Step 3: Sew the surface on the Pad. 251

Step 4: Create the Groove. 253

Step 5: Split the solid with an imported surface. 255

Step 6: Shell the created solid. 257

Step 7: Create the Shaft. 258

Step 8: Create the Holes and Pockets. 261

Step 9: Assemble a new body. 272

Lemon Squeezer 280

Step 1: Completing the wireframe elements 280

Step 2: Creating the basic surfaces 286

Step 3: Creating a blend surface with coupling and adding the handle 289

Step 4: Creating filtering holes 298

Wireframe Recapitulation Exercise

Load the part called wireframe_recap_begin.CATPart from the ''Companion'' and save the part in the Students directory.

1. First you are going to create a maximum Z extremum on the left curve.

Click on the Extremum icon .
The Extremum Definition Dialog box is opened, select the Maximum option.
Select the Spline.1
Select the XY plane as Direction or Z axis by opening a contextual menu in the Direction field.

Click OK to confirm the Z extremum creation.

1. You are going to create a minimum Z extremum on the right curve.

Click on the Extremum icon .

The Extremum Definition Dialog box is opened, select the Maximum option.
Select the Sketch.1.
Select the XY plane as Direction or Z axis by opening a contextual menu in the Direction field.